We recently created a sign for a client. We liked the design so much so we decided to make two and keep one for ourselves. It is a very simple sign but it will look good in the shop.
We designed our sign in Enroute Pro. We’ll be cutting it out of 2″ 15lb Precision Board HDU on our MultiCAM 3000 Router. The design is a wood grain over a dimensional letter and we threw in some big rivets for fun.
The first thing we was to cut the letters face down and to pocket out room in the back for LED’s (in case we want to add them later). We also added holes for the wall mount studs.
We then flipped the letters and re registered them on the table to begin cutting the 3D face.
Once our letters are cut it’s time to paint!
Two coats of Coastal FSC-88 Primer and we’re ready to add color.
We’ve added two coats of latex base then several coats of a darker latex glaze. Once done we painted the sides.
A little Modern Masters Metallic and a glaze on a black metallic and our rivets are complete.
Posts are installed – we’re ready to put this baby on the wall! (I just have to find a spot somewhere). – Steve