Thank you Sign Builder Illustrated Magazine once again for putting KDF on the cover featuring the Callahan’s Project! What a fun project this was. Click below for the article.
The shop is all abuzz with the news!
We’re very excited to announce we have completed the construction of our new wrap area! We’ve tripled our capacity and we’re ready to wrap!
Of course now we need a sign for the 18′ walls and you know a small sign won’t do. So… we went with a 6′ x 7′ footprint. Nanette came up with a real nice design that we could work with to make a printable dimensional sign.
Here is the original design
Once Rad setup the file for production it was time to cut the foam. We started by cutting the elements of the sign out of simple white gator foam of varying thicknesses. 2″, 1″ and 1/2″.
Into our new paint shop and all the elements are painted. this is a waterborne paint system so its quick dry – all the parts are back out to the printing department for flatbed printing on our Oce’ 350.
Now its time for assembly. All the elements are on the table – screwed and glued.
This is basically one long day of work to get this cut, painted, printed and up on the wall.
This gives you a good idea of how big this bad boy is. Greg is ready to wrap!